@article { author = {Gandomkar, Asghar}, title = {Application of Hydraulic Flow Unit Technique for Permeability Prediction in one Iranian Gas Reservoirs, Case Study}, journal = {Journal of Gas Technology}, volume = {5}, number = {1}, pages = {22-31}, year = {2020}, publisher = {Iranian Gas Institute}, issn = {2588-5596}, eissn = {2588-5596}, doi = {}, abstract = {Estimating reservoir permeability in un-cored intervals-wells are a generic problem common for all reservoir engineers. In this paper, routine core analysis and well log data of an actual existing gas reservoir, from southwest west of IRAN, were used to develop a model of matrix permeability in un-cored well by using Hydraulic Flow Unit Approach (HFU). The Graphical Clustering Methods such as histogram analysis and probability plot are used to identify the number of hydraulic flow units. Also, the sum of square errors (SSE) method was used as criterion for confirming the optimal number of HFU’s. Permeability data can be obtained from well tests, cores or logs. Normally, using well log data to derive estimates of permeability is the lowest cost method. Formation permeability controls the strategies involving well completion, stimulation, and reservoir management.Results showed that six HFUs were identified from core data and each unit has its own mean Flow Zone Indicator (FZI). In addition, a correlation between FZI calculated from core data and that obtained from well log data was developed for estimating permeability in un-cored intervals-wells with R-Squared Value of 0.60. Also, Lorenz plot shows that the flow units 3 and 6 have a good porosity and high permeability.}, keywords = {Flow Zone Indicator,HFU,gas reservoir,Histogram Analysis,Probability Plot,SSE}, title_fa = {کاربرد مفموم واحدهای جریانی هیدرولیکی برای محاسبه تراوایی در یکی از مخازن گازی ایران، مطالعه موردی}, abstract_fa = {تخمین تراوایی در چاههای فاقد مغزه یکی از چالش های مهندسین مخازن است. در این مطالعه، از داده های آنالیز متداول مغزه به همراه داده های چاه پیمایی یکی از مخازن گازی جنوب غرب ایران به منظور تعیین مدل تراوایی با استفاده از مفهوم واحد جریان هیدرولیکی استفاده شده است. روش های آنالیز خوشه بندی شامل آنالیز هیستوگرام و نمودار احتمال نرمال جهت تعیین تعداد گروه های سنگی مورد استفاده قرار گرفت. همچنین، روش خطای حداقل مربعات جهت تعیین تعداد بهینه گروه های سنگی در نظر گرفته شده است. داده های تراوایی از طریق آنالیز چاه آزمایی، مغزه و چاه پیمایی به دست می آید. با این وجود استفاده از داده ای چاه پیمایی از ارزان ترین روش ها است. اهمیت تراوایی سازند در تکمیل چاه، تحریک سازند و مدیریت مخزن تاثیر می گذارد. نتایج نشان می دهد که 6 واحد جریان هیدرولیکی وجود دارد که هرکدام شاخص ناحیه جریانی مربوط به خود را دارد. علاوه براین، یک معادله تجربی بر اساس داده های مغزه و چاه پیمایی جهت تخمین تراوایی با دقت 0/60 ارایه گردید. همچنین، نمودار لرنز نشان می دهد که واحد جریانی 3 و 6 دارای تراوایی و تخلخل قابل توجهی هستند.}, keywords_fa = {شاخص ناحیه جریانی,واحد های حریانی هیدرولیکی,مخازن گازی,آنالیز هیستوگرام,نمودار احتمال,خطای حداقل مربعات}, url = {https://www.jgt.irangi.org/article_251657.html}, eprint = {https://www.jgt.irangi.org/article_251657_b77766728974c31fc1b157e26743a239.pdf} }